Easy to do but you should have some knowledge of psp and where the tools are located.
 
 
 

**Open a new image large enough to hold the name you want to type.  (I used 600X300) Your letters must be very large to begin with. For this font I used 200pt.

**Type the name you want to use.  In this case, the letters are already filled.  So choose the outline color (the top color box on the color palette) and the fill color (the bottom box on the color palette.)

This font will look like this.

You need to color the feet.  You will use the majic wand to select the part of the image you want to color.
The magic wand is found in the selection tools and looks like this. 

**Set the tolerance to 10 the feather to O.  Set mode to ADD.

**Click inside each of the feet with the magic wand.

You will see floating ants inside the feet.

**Go to selections, modify, expand
Set the expand to 1 or 2.  You will be able to see how far the selection
expands.  You want to be sure its a tiny bit outside the inside edge so the unfilled area
of the shoes are filled with color when you flood fill them.

**Using the top color box on the color palette choose the color you want the shoes to be.

**Now click on the flood fill icon. 

**Click inside the first shoe.  It will fill with the color in the top
color palette box.

All the shoes will fill with color.  You can add inner bevel or any other enhancements you want to add
at this time.  After you do that go to

**selections, none

Save your image and your done.

Same steps for more elaborate fonts with less prefilled color.  Just use the magic wand on all the areas
that are to be the same color.  Finish one color, then go to the next color.